• 5HP main motor
• D1-5 spindle nose
• Hardened and ground bed ways
• Hardened and ground headstock gears and shafts
• Feed rod o/l clutch
• 110V controls with no volt release and E-stop
• Gap bed
• Inch/metric dual dials
• Totally enclosed universal gearbox
• Foot brake
• Flood coolant
• Full length splashguard
• Pull-out chip tray (drawer),
• 4-way tool post
• D1-5 back plate
• Instruction and parts manual, service tools

 

Center height 7”
Swing over bed 14 1/4”
Swing over crosslide 8 5/8”
Swing in the gap 22”
Headstock spindle taper #5MT
Headstock spindle bore 1 5/8”

Width of bed 10”
Gap width in front of faceplate 6”
Crosslide travel 8 1/4”
Compound travel 3 3/4”
Tailstock quill travel 5 3/4”
Tailstock quill taper #3MT
Tailstock quill diameter 2”
Inch threads (36) 4 – 72 TPI
Metric threads (27) 0.4 – 7.0 mm
Longitudinal feeds (in/rev) 0.0012 – 0.016
Cross feeds (in/rev) 0.0004 – 0.0053
Net weight 2,000 lbs.
Overall machine dimensions approx. 7’ x 3’ x 5’H